Reinstall sandisk cruzer software upgrade#
Reinstall sandisk cruzer software free#

IMO USB drives should really be the last choice and to expect issues in regards to the typical unreliable USB issues, different specs on replacements, ultra slow speeds, high failure rates and the understanding that there is a much higher chance of needing to do a complete reinstall to new drives followed by a backup restore.

Reinstall sandisk cruzer software free#

If additional wires are ok and you have free Sata ports then by all means pickup a couple small, inexpensive Sata SSD drives and use them. :DДЇor any new system I'd highly suggest people use DOMs and to look at the newer boards with dedicated DOM ports. Yes they are more expensive but they are much faster, more reliable, not crappy USB, don't require additional cabling and really quite cute little things plugged into the board. it was me after all!ДЄs usual, it comes down to money. From what I've read this us quite a rare thing to happen but hey. Even Supermicro hadn't run across this issue before, or at least the tech I was working with hadn't. Had one that was bad which caused the bios no longer boot them and took sometime to figure out. After reading on the down sides with them as boot media I looked at SSD drives but didn't want the extra cables so went with the Sata DOMs. Used 2 as a mirrored boot and the other 6 as a raidz2 to play with. I initially looked at and bought 8 USB Sandisk Cruzer FIT drives. I avoid shutting it down, I avoid rebooting it, and I avoid upgrading it because I never know if its going to actually work or require 2 or 3 tries.

Reinstall sandisk cruzer software upgrade#

It's horribly unreliable, has problems with updating at times (I always do it from the CLI because the GUI often times-out and the upgrade fails mid-way through), and is generally just a pain to deal with. I do have a USB based FreeNAS system still, and I hate the thing (passionately). SATA DOMs are not excessively expensive (my 32GB SATA DOM was $55 or so) and it was a good $55 spent as I have had no issues so no downtime, no hassle, and no need to do an RMA or buy yet another USB stick. If I were the boss and what I said was how things went, I would start recommending SATA DOMs and SSDs first if reliability is important (yes, even over mirrored USBs), and secondly go for USB if there are other bigger problems. Yes, there's no mirror with a single SATA DOM, but people with SATA DOMs avoid all sorts of other problems such as compatibility with booting from USB, performance implications with USB which sometimes affect the system's reliability, and other random issues that are regularl pinned on USB. The real way to go is a SATA DOM or an inexpensive (not cheap, inexpensive) SSD. In all honesty, just watching all of the problems coming and going, if you are truly shooting for reliability, doing mirrors on USB is not the way to go. I believe that the community has asked for a fix for this before (create an unformatted partition on the boot device), but was shot down as not a good solution.Дў. I can understand that with a filesystem on the drive, some space might be occupied or calculated different dependent on the file system, however when there is no data, partitions or file systems on the drive the capacity was still lower.ДЎ. When I reached out to Sandisk for support to find out why I was missing 350MB, I was given some bull crap about the operating system taking some of that storage for itself. Not a huge deal, it meant an hour or two of no file or media services for the family. Now, the kicker here is that I cannot re-silver my boot volume to the new drive as it's smaller, forcing my hand to backup my configuration and re-install FreeNAS from scratch. Where as the new drive (Model SDCZ33-016G-B35):Дa0: 14907MB (30529536 512 byte sectors: 255H 63S/T 1900C)Д¬learly with the model numbers there has been a hardware refresh. Nothing could be done of course, but hey, it was nice to vent my frustrations somewhere and I appreciate that people were rather nice and supportive about it (I know I can be annoying sometimes in the chat room!). I began to cuss and rage in the IRC chat room. I didn't notice this at first, but when trying to re-silver, my FreeNAS box complained the target drive was too small. Two new drives I ordered from Amazon (Canada) were approximately 350MB smaller in terms of capacity. This is something I found out when one of my Cruzer drives started to degrade and needed replacement after a years worth of service. This is bad because they are the most recommended drives for booting as the hardware failure rate is fairly low. Turns out that not all Sandisk Cruzer Fit USB drives are build equally. However, I came across an issue I didn't really expect. It helps with fault tolerance, allows the system to keep running even when something breaks. As everyone knows, having a mirrored boot volume is a good thing.